manualshive.com logo in svg

Panasonic KX-TDE100, Руководство по установке, Страница: 119 / 294

Поделиться
Скачать
Panasonic KX-TDE100 Скачать руководство пользователя страница 119

3.6  Information about the Physical Extension Cards

3.6.1  CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)

Function

CSIF4:

 4-port CS interface card for 4 CSs.

CSIF8:

 8-port CS interface card for 8 CSs.

RJ45

(LINE 1 to LINE 8)

LED

To CS

Accessories and User-supplied Items

Accessories (included):

 none

User-supplied (not included):

 RJ45 connector

CAUTION

Make sure that the status of all the CSs connected to the CSIF cards are set to in-service (INS). For
information about how to view CS information using the Maintenance Console, refer to "2.6.15  Utility—
CS Information" in the PC Programming Manual. If there is a CS in out-of-service (OUS) status, make sure
that it is securely connected to the CSIF card. If the CS remains in OUS status, there may be a fault with
the connection. Do not leave the connected CS in OUS status since it may cause severe damage to the
CSIF card.

Note

•

LINE 5 to LINE 8 are for CSIF8 card only.

•

When using the CSIF4 card, please note that the PBX software will recognise the CSIF4 card as the
CSIF8 card. As a result, 8 cell stations may appear to be available; however, only 4 cell stations are
supported by the CSIF4 card.

•

For details about connecting the CS, refer to "3.9.7  Connecting a Cell Station to the
PBX" in "3.9  Connection of DECT Portable Stations" or "3.10.7  Connecting a Cell Station to the
PBX" in "3.10  Connection of 2.4 GHz Portable Stations".

Installation Manual

119

3.6.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144)

Содержание KX-TDE100







































































































































































































































































































Отзывы:

Нет отзывов