Panasonic KX-TDA5450, Руководство по установке

Страница: 61 / 86

–
Protocol: UDP ; Port number: 500
–
Protocol: ESP ; Port number: Not required
•
PPTP
–
Protocol: TCP ; Port number: 1723
–
Protocol: GRE ; Port number: Not required
*2 If a DHCP server is assigned, a MAC address must also be assigned (refer to 3.5.1 DHCP Server ).
*3 If no remote host is assigned, IP packets that are sent from all the remote hosts will be targets for address translation.
3.
Click Add .
A confirmation screen is displayed.
4.
Click Back to [NAT Settings] to return to the previous screen.
Private IP Packet Restriction to WAN
Specifies whether to block IP packets that have private addresses as a source IP address to be sent to the
WAN port without NAT.
1.
Check the box to block IP packets.
2.
Click Set .
A confirmation screen is displayed.
3.
Click Back to [NAT Settings] to return to the previous screen.
VPN Pass-through
Specifies the type of VPN pass-through, IPSec or PPTP.
1.
Check the desired box.
2.
Click Set .
Note
•
The new setting must be followed by a reboot to become effective (refer to "3.8.1 Reboot").
•
It is necessary to configure the Port Mapping (Port Forwarding) settings to allow access from the
Internet.
Document Version 2008-10 Installation Manual 61
3.5.4 NAT Settings