Panasonic KX-TDA50 Скачать руководство пользователя страница 317

Страница: 317 / 668

4.7 Configuration [1]

Feature Guide

317

Fault-DIF: The card installed in the slot differs from the programmed card type.

Pre-Install: There is no card in the slot, but the card type is programmed for the slot.

Idle: There is no card in the slot, nor programming of the card type for the slot.

Programming References

4.7.8 Slot [1-1] Card Command

Feature Guide References

None

Version

Indicates the version of the installed card (reference only).

Default

Current version number

Value Range

Version number

Feature Guide References

None

4.7.2

Slot [1-1] MPR Card Property

The properties for the MPR card can be specified.

Memory Expansion Card:

Indicates whether an MEC card is mounted on the MPR card. To change the MEC card installation status,
click on this cell, then click

in the dialog box that appears. Clicking on the

Command

button performs

the same function.
Removing the MEC card here also deletes related MEC card data.

Default

Current status

Value Range

None, Installed

Programming References

4.7.1 Slot [1-1]

Feature Guide References

None

Содержание KX-TDA50





























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание KX-TDA50

Отзывы:

Panasonic KX-TDA50, Руководство по функциям, Страница: 317 / 668

Результаты поиска

Содержание KX-TDA50

Отзывы: