Panasonic KX-TDA50 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 668

Panasonic KX-TDA50 Скачать руководство пользователя страница 3

Feature Guide

3

"Idle extensions are automatically searched for according to a preprogrammed hunting type (

→

Extension Hunting Type [680])."

Links to Other Pages and Manuals

If viewing this Feature Guide with a PC, certain items are linked to different sections of the Feature Guide
and other Hybrid IP-PBX manuals. Click on a link to jump to that section.

Linked items include:

•

Installation Manual References

•

Feature Guide References

•

User Manual References

•

PT Programming References

Notes

•

Certain PTs, features, and optional service cards are not available in some areas. Consult your certified
Panasonic dealer for more information.

•

Every system programming setting can be accessed using a PC and the Panasonic KX-TDA50
Maintenance Console software (

→

2.3.1 PC Programming). For programming details, refer to the on-

line help which is installed along with KX-TDA50 Maintenance Console (

→

3.2.1 Installing and Starting

KX-TDA50 Maintenance Console).

WARNING

Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes
unusual noise. These conditions can cause fire or electric shock. Confirm that smoke
has stopped and contact an authorized Panasonic Factory Service Center.

Trademarks

•

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.

•

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the
United States and other countries.

•

All other trademarks identified herein are the property of their respective owners.

•

Screen shots reprinted with permission from Microsoft Corporation.

Feature Highlights

Networking Features

The Hybrid IP-PBX supports the following private networking features:

TIE Line Service

PBXs can be connected via a privately leased telephone lines forming a private network. These "TIE
lines" provide a cost-effective way to route calls and communications, and are often used to connect
corporate offices located in different cities.
(

→

1.25.1 TIE Line Service)

QSIG Support

TIE line service can be used on a private network that implements the QSIG protocol (Q.931). QSIG
offers TIE line service as well as advanced caller and called party identification features.
(

→

1.25.2 QSIG Network)

«
1
2
3
4
5
...
»

Содержание KX-TDA50





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов