Panasonic KX-TDA50, Руководство по функциям

Страница: 104 / 668

1.12 Holding Features
104 Feature Guide
If one of the following occurs frequently with an SLT, choose "
Mode 2
", "
Mode 3
", or "
Mode 4
":
a)
When an SLT user answers a call, a reorder tone is heard or no one is heard on the other end.
b)
When an SLT user goes off-hook, a reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these problems, choose
"
Mode 2
", "
Mode 3
", or "
Mode 4
". Every call will be terminated unless the Hold feature number is
entered after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.
• Hold Alarm tone pattern has a default (
→
5.2.1 Tones/Ring Tones).
User Manual References
1.4.2 Call Hold
1.12.2 Call Park
Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be
used as a transferring feature; this releases the user from the parked call to perform other operations. A
parked call can be retrieved by any extension user.
Conditions
• Automatic Call Park
It is possible to select an idle parking zone automatically.
Hold Transfer to CO Line Transfer to Extension
Mode 1
Flashing the hookswitch
+
Going on-hook
Flashing the hookswitch
+
CO Line Access No.
Flashing the hookswitch
+
Extension No.
Mode 2
(Default)
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
CO Line Access No.
Flashing the hookswitch
+
Extension No.
Mode 3
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
CO Line Access No.
Flashing the hookswitch
+
Extension No.
Mode 4
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
CO Line Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.