background image

Destination

Availability

Extension of Another PBX (via TIE Line, Access without PBX Code)

ü

FWD/DND Mode

While searching for an idle extension within an idle extension hunting group, any extension that has set
FWD—All Calls or DND feature will be skipped, and the call will go to the next extension in the group.

PC Programming Manual References

5.16  [3-6] Extension Hunting Group
5.17  [3-6] Extension Hunting Group—Member List

PT Programming Manual References

[680] Idle Extension Hunting Type
[681] Idle Extension Hunting Group Member

Feature Manual References

4.1.9  DND (Do Not Disturb)
6.1.6  FWD (Call Forwarding)
21.1  Capacity of System Resources

9.1.10  INCOMING CALL FEATURES

Description

Each CO line functions as either a public line or a private line. Private lines are used to connect different PBXs
and form a private network (

®

 13.1.13  PRIVATE NETWORK FEATURES), while public lines connect a PBX

to a public network, i.e., the telephone company. Certain PBX features are available depending on the
networking type (public or private) of each CO line.

1.

Networking Type Used by Each CO Line

Each CO line port (channel) of a CO line card is assigned a port (channel) type which determines the CO
line’s networking type—public or private.
3.17  [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—

Trunk Property

12.2  [10-2] DIL Table & Port Settings—DIL—

Trunk Property

162

Feature Manual

Document Version  2010-11  

9.1.10 INCOMING CALL FEATURES

Содержание KX-TDA50

































































































































































































































































































































































































Отзывы: