manualshive.com logo in svg

Panasonic KX-TDA0484, Руководство по программированию, Страница: 15 / 68

Поделиться
Скачать
Panasonic KX-TDA0484 Скачать руководство пользователя страница 15

2.2 Programming

Programming Guide

15

Parameter Descriptions

The parameters indicated with "

#

" must be changed while the VoIP Gateway Card is in the "STOP" status (see 

"2.3.1 Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot").

The parameters indicated with "

*

" must be changed while the card is in the "STOP" status (see "2.3.1 Status 

Control"). The changes do not have to be followed by a reboot to become effective.

Port Number Settings

Voice CODEC Settings

Parameter & Description

Default

Value Range

#

H.225 Port No.

Specifies the port number for the H.225 protocol (call control) 
in an H.323 protocol suite.

Generally, there is no need to change the default value.

1720

1 to 65535

#

H.245 Port No.

Specifies the port number for the H.245 protocol (negotiation 
of channel usage and capabilities) in an H.323 protocol suite. 
4 consecutive ports, starting with the specified port, will be 
used (by default, 1721 to 1724).

Generally, there is no need to change the default value.

1721

1 to 65532

#

RAS Port No.

Specifies the port number for the H.225 protocol (RAS) in an 
H.323 protocol suite.

Generally, there is no need to change the default value.

1719

1 to 65535

#

RTP/RTCP Port No.

Specifies the port number for RTP/RTCP. 8 consecutive 
ports, starting with the specified port, will be used (by default, 
5004 to 5011).

Generally, there is no need to change the default value.

5004

1 to 65528

Parameter & Description

Default

Value Range

*

Voice CODEC Priority 1st–4th

Specifies the type of CODEC for voice communications.

Choose the appropriate CODEC for the network environment 
(e.g., bandwidth, CODEC conditions of the remote terminal). 
When using multiple CODECs, set them in an appropriate 
priority order.

Prior to establishing a call, a negotiation takes place over the 
network and the CODEC to be used will be decided 
depending on the setting of this parameter.

For details about relations between bandwidth and CODEC, 
refer to "Detailed Explanations" in "2.2.3 Voice 
Communication Parameters".

1st: G.729A
2nd: No default
3rd: No default
4th: No default

G.723.1,
G.729A,
G.711Mu,
G.711A

Содержание KX-TDA0484





































































Отзывы:

Нет отзывов