Panasonic KX-TD500CE Скачать руководство пользователя страница 324

Страница: 324 / 376

1.17

Display Features

324

Features Guide

System Feature Access Menu

Description

This feature provides a display of the system features available at any time and allows the
extension user to have access to the desired features.

•

The features available are:

•

In addition to the features above, the Manager and the Operators can execute the
following features.

Conditions

None

Programming Guide References

System programming is not required.

Absent Message Capability

Electronic Station Lockout

Automatic Callback Busy (Camp-On) Cancel

Executive Busy Override Deny

Call Forwarding (set / cancel)

External Modem Control

Call Log, Incoming

Live Call Screening (LCS), Password Set

Call Log Incoming, Log Lock

Log-In / Log-Out

Call Park

Message Waiting

Call Pickup, access / deny

Paging, access / answer / deny

Call Waiting

Pickup Dialling (Hot Line)

Data Line Security

Station Programme Clear

Do Not Disturb (set / cancel)

Timed Reminder (Wake-Up Call)

Door Opener

Walking COS

Doorphone Call

Background Music (BGM) – External

Timed Reminder, Remote (Wake-Up Call)

Outgoing Message (OGM), Record / Playback Trunk Busy-out Setting

Remote DND (Do Not Disturb)

Trunk Route Control

Remote FWD (Call Forwarding) Cancel-Once UCD Monitor Mode

Switching COS

Содержание KX-TD500CE

























































































































































































































































































































































































Результаты поиска

Содержание KX-TD500CE

Отзывы:

Panasonic KX-TD500CE, Руководство по функциям, Страница: 324 / 376

Результаты поиска

Содержание KX-TD500CE

Отзывы: