manualshive.com logo in svg

Panasonic KX-TD500CE, Руководство по функциям, Страница: 291 / 376

Поделиться
Скачать
Panasonic KX-TD500CE Скачать руководство пользователя страница 291

1.16

Button Features

Features Guide

291

Button, Line Access

Description

Used to get a line for making / answering a call. Line Access Buttons are provided on PTs only.
They are categorised as follows:

All PTs in the system can be categorised as <ICM type PT> or <DN type PT>.

<ICM type PT> (default)

ICM CO buttons

All PTs in the system have one ICM button and one L-CO button by default.

<DN type PT> (default)

DN button(s) + CO buttons

If at least one PDN button is assigned on a PT, it functions as a DN type PT. In this case, ICM 
button on a PT does not function.

Button Type

Description

Intercom (ICM)

Used to make or receive intercom calls, and to set or cancel various features. 
Available for an ICM type PT only.

CO

Single-Co
(S-CO)

Used to get a specific CO line for making or receiving outside (CO, TIE) 
calls.

Group-Co
(G-CO)

A group of CO lines (Trunk Group) can be assigned to a flexible Co button 
as Group-CO (G-CO). Any incoming call from CO lines in the Trunk Group 
arrives at he Group-CO button. To make an outside call, the extension user 
can get an idle Co line in the trunk group simply by pressing the G-CO 
button.

Loop-CO
(L-CO)

All CO lines in the system or in a tenant (if "Tenant Service" is utilised) can 
be assigned to a Flexible CO button as a Loop-CO (L-CO) button. An 
incoming CO call on any CO line arrives at the L-CO, unless there are S-CO 
or G-CO buttons associated with the line or unless the L-CO button is already 
in use. The PT user can get an idle CO line simply by pressing the L-CO 
button.

DN

Primary 
Directory
Number (PDN)

Used to make or receive both intercom and outside (CO, TIE) calls, and to set 
or cancel various features. An extension which has at least one PDN button 
is called "DN type PT."

Secondary 
Directory
Number (SDN)

A copy of the other extension's PDN button. Acts as a proxy of the owner 
PDN button. SDN button reflects the status of the PDN button of the owner 
extension. Incoming calls to the PDN of owner extension also appears on the 
SDN button. Assignable for a DN type PT only.

Содержание KX-TD500CE

























































































































































































































































































































































































Отзывы:

Нет отзывов