manualshive.com logo in svg

Panasonic KX-TD500CE, Руководство по функциям, Страница: 203 / 376

Поделиться
Скачать
Panasonic KX-TD500CE Скачать руководство пользователя страница 203

1.8

Ringing Features

Features Guide

203

Timed Reminder (Wake-Up Call)

Description

Each telephone can be set to generate an alarm tone at a preset time as a reminder. When this 
feature is set, an alarm tone will ring for 30 seconds (default) at the programmed time.
Wake-up call
If a voice message is recorded beforehand, a wake-up message is heard instead of an alarm tone 
when an extension user goes off-hook. 

This feature can be activated only once or everyday at a specified time.

Conditions

•

System Time
Be sure that the system clock is working correctly.
System Time can be programmed either by User or System Programming. 

•

Setting a new time clears the preset time.

•

Timed Reminder Ringing Time
The alarm continues for a specific period of time (default: 30 seconds).
This period of time can be changed by System Programming. 

•

Hardware Requirements for a wake-up call
To utilise a wake-up call, DISA card (KX-T96191) is required. 

•

OGM Recording
To utilise a wake-up call, set OGM Type of an OGM Group to "Wake-up." OGM Recording 
can be done only by the Manager or an Operator. 

•

What if a wake-up message is not recorded?
An alarm tone is heard instead of a wake-up message. 

•

The number of extension users who can set this feature is not limited. However, the number 
of extension users who can hear the wake-up message at a time is limited to a maximum of 
56 per DISA card.
If the 57th or later extension user goes off-hook to hear the wake-up message, he or she will 
hear the alarm tone instead of the wake-up message.

•

Station Message Detail Recording (SMDR)
SMDR automatically records the detailed Timed Reminder information (date, time, 
extension number, start / no answer). It is programmable to be printed out when the Timed 
Reminder starts and the alarm is not answered.

•

To stop the alarm, lift the handset or, with a PT, press any button.

Installation Manual References

•

2.6.1 DISA Card (KX-T96191)

Содержание KX-TD500CE

























































































































































































































































































































































































Отзывы:

Нет отзывов