manualshive.com logo in svg

Panasonic KX-TD500CE, Руководство по функциям, Страница: 196 / 376

Поделиться
Скачать
Panasonic KX-TD500CE Скачать руководство пользователя страница 196

1.7

Dialling Features

196

Features Guide

System Speed Dialling

Description

The KX-TD500 system provides up to 1000 / tenant, 2000 / System abbreviated speed dial 
numbers (24-digit long for each) available to all extension users. 

Conditions

•

System Speed Dialling numbers and names can be programmed either by User or System 
Programming.

•

Toll Restriction Override for System Speed Dialling
Overriding Toll Restriction for System Speed Dialling can be activated or deactivated per 
tenant by System Programming. 

•

Tenant Service
If "Tenant Service" is employed, up to 2000 Speed Dialling codes can be shared among each 
tenant under the condition of up to 1000 codes per tenant.

•

<For PT users>
Speed Dialling, One-Touch Dialling, manual dialling, Last Number Redial and Saved 
Number Redial can be used in combinations.

•

<For SLT users>
If a stored feature number includes " " or "#," rotary or pulse SLTs cannot use it.

Programming Guide References

•

2.2  Tenant

– System Speed Dialing Entries Max.
– System Speed Dial TRS Level Override

•

2.3 Numbering Plan

–  Speed Dialing - System

•

5.2 System Speed Dialling

– Name
– Number

Features Guide References

1.6

Originating Features

•

Toll Restriction Override for System Speed Dialling

1.17

Display Features

•

Call Directory

User Manual References

•

2.2.2 Easy Dialling

•

4.3.2 System Speed Dialling Number Set (001)

•

4.3.3 System Speed Dialling Name Set (002)

Содержание KX-TD500CE

























































































































































































































































































































































































Отзывы:

Нет отзывов