Panasonic KX-TD500, Руководство по функциям

Страница: 356 / 398

ISDN Features
356 Features Guide
2.2 ISDN Originating Features
Calling Line Identification Presentation (CLIP)
Description
Calling Line Identification Presentation (CLIP) enables the calling party's number to be shown
on the display of the called party's telephone when a call is received.
This is one of the ISDN supplementary services.
To use the CLIP service, number assignments are required as follows:
• CLIP number for each outside line
• CLIP number for each extension
Conditions
• CLIP Numbers for ISDN PRI Lines
When an extension user makes an outside call using an ISDN PRI line, one of the following
numbers (depending on the extension user's choice) is displayed on the telephone of the
other party as the CLIP number.
a)
CLIP number assigned to the trunk line
The number stored in "Subscriber" <Section 4.2 Trunk Line in the Programming
Guide>.
b)
CLIP number assigned to the extension line
The number stored in "[CLIP Number] Public" <Section 4.3 Extension Line in the
Programming Guide>.
• CLIP Numbers for ISDN BRI Lines
When an extension user makes an outside call using an ISDN BRI line, the number stored
in "DN" <Section 1.2.9 Card Properties (BRI) – SPID/DN in the Programming Guide> is
displayed on the telephone of the other party as the CLIP number.
• The CLIP service for outgoing CO calls can be restricted by dialing the feature number for
"CLIR" (Calling Line Identification Restriction).
• The number actually sent to the calling or called party may be different from the system
programming number. It depends on the contract with your ISDN service provider.
• ISDN Public Switched Telephone Network
This feature applies to the calls over the ISDN Public Switched Telephone Network.
• Hardware Requirements
To utilize this feature, a BRI card (KX-TD50288) or a PRI23 card (KX-TD50290) is
required.
Installation Manual References
• 2.5.6 BRI Card (KX-TD50288)
• 2.5.7 PRI23 Card (KX-TD50290)