Panasonic KX-TD500, Руководство по функциям

Страница: 156 / 398

General Features
156 Features Guide
Automatic Route Selection (ARS)
Description
Automatic Route Selection (ARS) is a system programmable feature that automatically selects
the least expensive route available at the time an outgoing CO call is made. ARS applies to an
outgoing CO call made by dialing the feature number for Local CO Line Access / ARS (9 =
default). Pre-programming eliminates the need of dialing the access code of the least expensive
carrier.
The appropriate Trunk Group is selected and the carrier access code is added before the number
is outpulsed.
System Programming Example (Please refer to "7. ARS" section in the
Programming Guide)
The following shows how to program ARS so that the extension user can call the XYZ
Company via the least expensive line.
Step 1. To utilize ARS feature, set "Automatic Route Selection" in "System-Tenant" to "Yes."
Step 2. Store the telephone number of the outside party that will use the ARS feature. For
example, if XYZ Company's telephone number is "1-234-567-8910" (not including the line
access code), store the leading 7 digits of the number "1234567" and associated Routing Plan
No. (01 for example) in "ARS - Leading Digits Table."
Step 3. Check all carriers available to call the stored telephone number and their Trunk Groups.
Supposing that there are three carriers available to call the XYZ Company and each carrier's
line is assigned to a Trunk Group as follows:
Carrier E — Trunk Group 1
Carrier F — Trunk Group 2
Carrier G —Trunk Group 3
Then check the fee charged by each carrier:
Table A (Example: ARS Leading Digits Table)
Entry
No.
Dial Routing Plan
No.
001
002
•
•
•
800
1234567 01