manualshive.com logo in svg

Panasonic KX-TD308, Руководство по установке, Страница: 63 / 408

Поделиться
Скачать
Panasonic KX-TD308 Скачать руководство пользователя страница 63

2-34

Installation

2.8

System Restart

After starting the system, if the system does not operate properly,
restart the system.
Before restarting the system, try the system feature again to
confirm whether there definitely is a problem or not.
System Restart causes the following:

1. Camp-on is cleared.
2. Calls on Hold are terminated.
3. Calls on Exclusive Hold are terminated.
4. Calls in progress are terminated.
5. Call Park is cleared.

Other data is not cleared by System Restart.

1. Press the Reset Button with a pointed tool.

Notice

If the system still does not operate properly, please see Section 6.1.4
“Using the Reset Button”. 

PER HYBRID SYSTEM

Reset Button

Содержание KX-TD308

























































































































































































































































































































































































































Отзывы:

Нет отзывов