manualshive.com logo in svg

Panasonic KX-TD308, Руководство по установке, Страница: 51 / 408

Поделиться
Скачать
Panasonic KX-TD308 Скачать руководство пользователя страница 51

2-22

Installation

2.3.7

External Music Source Connection

2.3.7

External Music Source Connection

One music source such as a radio (user-supplied) can be connected
to the KX-TD308 as illustrated below.

Insert the plug to the earphone / headphone
jack on the external music source.
Use an EIAJ RC-6701 A plug (two-
conductor, ø 2.5mm in diameter).
• Input impedance: 8 

Ω

Maximum length of the cable
AWG 18 – 22: Under 10 m (33 feet)

DIGITAL SUPER HYBRID SYSTEM

External Music Jack

External Music source

Note

• System Programming of music sources used for Music on Hold and

Background Music is required.

• To adjust the sound level of the Music on Hold, use the volume control

on the external music source. 

Programming References

Section 4, System Programming
[803]  Music Source Use
[990]  System Additional Information, Field (20)

Feature References

Section 3, Features
Background Music (BGM) 

Background Music (BGM) – External

Music on Hold

Содержание KX-TD308

























































































































































































































































































































































































































Отзывы:

Нет отзывов