Panasonic KX-TD308 Скачать руководство пользователя страница 288 | Manualshive

Страница: 288 / 408

Panasonic KX-TD308 Скачать руководство пользователя страница 288

4.3

System Programming

VM Status DTMF Set

113

System Programming

4-45

Description

Sets the DTMF signals (“inband”) that are transmitted to the Voice
Processing System (VPS), by the Panasonic telephone system,
under all the dial and connect events which the VPS can occur.
The following signals are sent to the VPS with the assigned DTMF
signals:

RBT (ringback tone) : This signal is sent when calling an

extension.

BT (busy tone)

: This is sent when the called extension is

busy.

ROT (reorder tone) : This is sent when the dialed number is

invalid.

DND (DND tone)

: This is sent when the other extension has

DND assigned.

Answer

: This is sent when the other extension

answers the call.

Disconnect

: This is sent when the other extension

hangs up.

Confirm (confirmation tone) :

This is sent when the feature number for
“Message Waiting Lamp” is valid.

FWD VM RBT (FWD to VM ringback tone) :

Not available (reserved).

FWD VM BT (FWD to VM busy tone) :

This is sent when the called extension
has set Call Forwarding to VPS.

FWD EXT RBT (FWD to extension ringback tone) :

Not available (reserved).

Selection

• RBT / BT / ROT / DND / Answer / Disconnect / Confirm /

FWD VM RBT / FWD VM BT / FWD EXT RBT

• DTMF signal number: 3 digits (max.)

Default

RBT – 1; BT – 2; ROT – 3; DND – 4; Answer – 5; Disconnect – #9
Confirm – 9; FWD VM RBT – 6; FWD VM BT – 7; FWD EXT
RBT – 8

Programming

1.

Enter 113.

Display: 113 VM DTMF SET

2.

Press NEXT to program ringback tone status.

To program another status, keep pressing NEXT until the desired
status is displayed.

Display example: RBT :1

«
...
286
287
288
289
290
...
»

Содержание KX-TD308

























































































































































































































































































































































































































Отзывы:

Нет отзывов