manualshive.com logo in svg

Panasonic KX-TD308, Руководство по установке, Страница: 271 / 408

Поделиться
Скачать
Panasonic KX-TD308 Скачать руководство пользователя страница 271

4-28

System Programming

4.2

Manager Programming

Absent Messages 

(contd.)

008

Conditions

• There is a maximum of nine messages.  Messages 1 through 6 are 

programmed at the factory but can be changed.  Each message has a 
maximum of 16 characters.  

• You can enter a maximum of seven “%” characters per message which

can be programmed at each user’s extension.  The station user can enter
0 through 9, 

and # for the % characters.  If the user enters digits less

than the number of “%” characters, it is recommended to fill the
remaining “%” characters with “#” or “

”.

• If there are 4-digit extension numbers available in your system, add one

“%” to Message 3.  

• To display parts of the message which have scrolled off the display,

press

or

.

Feature References

Section 3, Features
Absent Message Capability

Содержание KX-TD308

























































































































































































































































































































































































































Отзывы:

Нет отзывов