manualshive.com logo in svg

Panasonic KX-TD308, Руководство по установке, Страница: 185 / 408

Поделиться
Скачать
Panasonic KX-TD308 Скачать руководство пользователя страница 185

3

Features

P

Features

3-121

P

ickup Dialing

Description

Allows an extension user to make an outgoing call by going off-
hook, if the user has previously stored the telephone number.  This
feature is also known as Hot Line.

Conditions

• A rotary dial telephone without the “#” button cannot program this

feature.  For programming the phone number, temporarily replace a
rotary dial telephone with a pulse telephone with the “#” button.

• The user uses a feature number to activate or deactivate pickup dialing. 
• If the feature is activated and the user goes off-hook, a dial tone is

generated for the waiting time and then dialing starts.  During the
waiting time the user can dial another party, overriding the Pickup
Dialing function.

• If the user answers an incoming call or retrieves a call on hold, the

Pickup Dialing feature does not work.  

• If the proprietary telephone is provided with a PF 12 button, the stored

number in the PF12 button is common with the one for Pickup Dialing.

Programming References

Section 4, System Programming
[100]  Flexible Numbering, Pickup dialing
[204]  Pickup Dial Waiting Time 

Feature References

None 

Operation References

DPT Features, Standard Telephone Features

—User Manual

Pickup Dialing (Hot Line)

Содержание KX-TD308

























































































































































































































































































































































































































Отзывы:

Нет отзывов