manualshive.com logo in svg

Panasonic KX-TD308, Руководство по установке, Страница: 168 / 408

Поделиться
Скачать
Panasonic KX-TD308 Скачать руководство пользователя страница 168

M

3

Features

3-104

Features

M

icrophone Mute

Description

Allows the proprietary telephone user to turn off the microphone,
for privacy reasons.

Conditions

• This is effective for the microphone only; only your voice will be muted

during a handsfree conversation.

• The user can hear the other party’s voice during Microphone Mute.

Programming References

No programming required.

Feature References

None

Operation References

DPT Features 

—User Manual

Microphone Mute

M

ixed Station Capacities

Description

This system supports a wide range of telephone sets, not only
Digital Proprietary Telephones (DPT) and Analog Proprietary
Telephones (APT) in the Digital Super Hybrid System, but also
single line rotary telephones (10 pps / 20 pps, employing dial pulse
signals) and single line push-button dialing telephones (touch tone).
The super hybrid method used in this system allows any telephone
to be connected to an extension modular jack without an adaptor.

Conditions 

If a telephone is replaced by another one, the stored data (such as feature
button storage) is preserved for the new one.

Connection References

Section 2, Installation
2.3.3  Extension Connection

Programming References

No programming required.

Feature References

None

Operation References

Not applicable.

Содержание KX-TD308

























































































































































































































































































































































































































Отзывы:

Нет отзывов