background image

40

For Optional Multi-Unit Users

Operating More than One Handset

You can register and operate up to 6
handsets at the base unit. Operating
more than one handset allows you to
have an internal call while
simultaneously conducting an
external phone call using another
handset.

The optional handset model number is KX-A102EB. The functions of the optional handset are the
same as the those of KX-TCD953EB handset.

An optional charger, KX-TCA110EB, is available from your Panasonic dealer.

Operating More than One Base Unit

You can register and operate your handset at up to 4 base units.
Since each base unit forms a radio cell, you can extend the range or area in which you can
make/answer calls with the same handset by placing the base units in suitable locations. For example,
you can use a handset in different radio areas, such as at home or the office. However, calls in
progress are cancelled when the unit moves to another radio area.

Ex. 3 optional KX-A102EB handsets are

added to 2 base units.

Ex. 6 optional handsets are added to a

base unit. Handset 1 is engaged in an
internal call with handset 3. Handset 2
is engaged in an external call.

Base Unit

H: Handset

Radio Range

H 2

H 3

H 1

H 4

H 5

H 6

H 1

B 1

B 2

H 2

H 3

H 4

H 5

B: Base Unit

KX-TCD953EB(042~045)  4.25.2000  1:55 PM  Page 40

Содержание KX-TCD953EB





























































Отзывы: