Panasonic KX-TCA121EXT страница 20 Скачать руководство пользователя

Страница: 20 / 111

7 DISPLAY

7.1. Display Icons

Various icons appear on the handset display to indicate the current status of the unit.

7.2. Caller ID Display

Important:

This unit is Caller ID compatible. To use Caller ID features (such as displaying caller phone numbers), you must subscribe
to Caller ID service. Consult your service provider for details.

Caller ID features

When an outside call is received, the caller’s phone number can be displayed.

Phone numbers of the last 50 different callers will be logged in the caller list.

While listening to a message recorded by the answering system, you can call back the caller without having to dial the phone
number.

When caller information is received and it matches a phone number stored in the unit’s phonebook:

−

The stored name will be displayed and logged in the caller list.

−

The handset will use the ringtone assigned to the caller’s category.

−

The handset will announce the audible call recording you made.

If the unit is connected to a PBX system, you may not receive the caller information.

When the caller dialled from an area which does not provide Caller ID service, “

” will be displayed.

When the caller requested not to send caller information, either no information or “

” will be displayed.

KX-TCD220SLT / KX-TCA122EXT / KX-TCA121EXT

Содержание KX-TCA121EXT
















































































































Результаты поиска

Содержание KX-TCA121EXT

Отзывы:

Похожие инструкции для KX-TCA121EXT

Бренды по названию

Популярные бренды

Panasonic KX-TCA121EXT, Руководство по обслуживанию

Результаты поиска

Содержание KX-TCA121EXT

Отзывы:

Похожие инструкции для KX-TCA121EXT

Бренды по названию

Популярные бренды