Panasonic KX-TA824, Руководство по функциям

Страница: 40 / 178

1.1 General Features
40 Feature Manual
Programming Manual References
[PT Programming]
[111] Music on Hold
[205] CO-to-CO Line Call Duration
[420] CPC Signal Detection—Incoming
[606] Call Transfer to CO Line
[PC Programming]
9.1.2 Main [1-2]—Music on Hold
9.1.7 Timers [1-6]—Call Duration—CO-to-CO Duration Limit
9.2.1 Main [2-1]—Transfer to CO
9.3.3 Detail [3-3]—CPC Signal Detection—Incoming
Feature Manual References
1.1.15 Call Hold
1.1.36 Consultation Hold
1.1.85 Music on Hold
1.1.91 Outside-to-Outside (CO-to-CO) Line Call Duration
Operating Manual References
1.3.27 Call Transfer—To Outside (CO) Line
1.1.27 Call Waiting
Description
A busy extension user can be alerted to a new call by Call Waiting. The busy extension user can then answer
the second call either by disconnecting the current call or placing it on hold.
If Call Waiting is enabled, a call waiting tone will be sent to the user under the following conditions:
a)
When an outside (CO) line call or a doorphone call is received, or
b)
When another extension executes the Busy Station Signaling (BSS) feature.
If disabled, a reorder tone will be sent to the extension that executed the BSS feature.
Conditions
• Data Line Security
When an extension user activates Data Line Security, Call Waiting is turned off ( 1.1.37 Data Line
Security).
• Call Waiting Tone
A proprietary telephone (PT) user can select the preferred call waiting tone (Tone 1 or Tone 2) through
personal programming (Call Waiting Tone Type Selection). For doorphone calls, Tone 1 is used as a
call waiting tone (not changeable). Tone 2 depends on the assignments in [423] CO Line Ring Tone
Pattern for outside (CO) line calls and [115] Extension Ring Tone Pattern for intercom calls.