Panasonic KX-T336, Справочное руководство системы

Страница: 1334 / 1605

12-C-7
• The following message
appears on the display:
PITS-PGM No.?
• The MEMORY button indicator
lights in red.
• Previously stored data appears
on the display.
<Example>
If preset to one touch dialing
button
M01/P: 9-1-201-123-
• The MEMORY button indicator
light goes out.
2.00 PF (Programmable Feature)
Button Assignment
Assigning various functions to the PF buttons of
the individual PITS telephone and DSS Console
is explained here.
The explanation of the message display applies
only to a PITS provided with the display.
Result
Operation
Comment/Note
• This display is called “Initial
display for PITS station
programming mode.”
• From now on in any status,
pressing the END button
restores this status.
• If the programming data of your
PITS has already been
accessed by another
administration device, the
following message appears on
the display.
Already Accessed
• Stored data as one touch
dialing.
• If nothing is stored, “Not
Stored” appears.
• To scroll,
use the or button.
(Note)
• “P” means PF button of the
PITS. If PF button on DSS
console associated with PITS
is pressed, “C” appears
instead of “P.”
• PF button number.
• If nothing is entered within one
minute after pressing a PF
button, “Initial display for PITS
station programming mode” is
displayed again.
Continued
1. Set the MEMORY switch at
the rear of PITS to
“PROGRAM.”
2. Press a PF button.
SET• • PROGRAM
MEMORY