Panasonic KX-T336, Справочное руководство системы

Страница: 1329 / 1605

12-C-2
1. Set the MEMORY switch at
the rear of PITS to
“PROGRAM.”
2. Press the appropriate DN
button.
The explanation of the message display applies
only to a PITS with the display.
• This status is called “initial
display for PITS station
programming mode.”
• If the programming data of your
PITS has already been
accessed by another
administration device, the
following message appears on
the display.
Already Accessed
• From now on in any status,
pressing the END button
restores this status.
• When the following messages
appears on the display,
changing the assigned feature
is impossible in this mode, and
can be changed only by the
system programming.
<Example>
PDN:DN 1011
(Primary Directory Number)
<Example>
SDN:DN 1012
(Secondary Directory Number)
<Example>
PRV-CO:P 2021
(Private CO)
<Example>
OHCA on DN
(Off-Hook Call Announcement)
<Example>
UCD Log
(UCD Log in)
<Example>
Local Alarm
(Local Alarm)
Result
Operation
Comment/Note
• The following message
appears on the display:
PITS-PGM No.?
• The MEMORY button indicator
lights in red.
• Previously stored data appears
on the display:
<Example>
DSS(DN):1011
• The MEMORY button indicator
light goes out and the
associated DN button indicator
lights in red.
• If nothing is entered within one
minute after pressing the DN
button, “Initial display for
PITS station programming
mode” is displayed again.
SET• • PROGRAM
MEMORY
Continued
1.00 DN (Directory Number)
Button Assignment
Assigning various features to the DN buttons of
individual PITS telephone is explained here.