17
KX-PRX120W/KX-PRXA10W
8 Service Mode
8.1.
Engineering Mode
8.1.1.
Base Unit
2). Press .
1). Register a Handset to a Base Unit. (*1)
3). Select "Initial Setup" using or
then press or
{
>
}
.
H/S key operation
H/S LCD
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
{^} {V}
5). Enter "7", "2", "6", "2", "7", "6", "6", "4".
Note:
7262 7664 = PANA SONI
(see letters printed on dial keys)
7). Enter "
ە
", "
ە
", "
ە
", "
ە
" (Address). (*2)
9). Press , a long confirmation beep
will be heard.
10). Press (off) to return to standby mode.
After that, turn the base unit power off and then power on.
8). Enter "
㸨
", "
㸨
" (New Data). (*2)
6). Select "Write EEP" using or
then press or
{
>
}
.
{^} {V}
Default Data
New Data
M
Caller List
^
V
M
^
V
Initial Setup
M
M
Service Mode
Read EEP
Write EEP
Get S/W Ver.
Set Addr.:
̲ ̲ ̲ ̲ ̲ ̲
Set Addr.:
Set Addr.:
M
M
8
M
M
Use existing Panasonic handset for this operation. (Example : KX-TGA860) , because KX-PRXA10
don't have the following menu.
*Example when using KX-TGA860
for
existing Panasonic handset
M
^
V
Line Setup
4). Select "Line Setup" using or
then press or
{
>
}
.
{^} {V}
M
{x}
(Locator)
Dial keypad
{i
c
}
(Off/Power)
{
ECO/R
}
ECO: Eco mode shortcut key
R: Recall/Flash
Navigator key/
Soft keys
