Erasing all entries
1
M
Menu
N
(right soft key)
a
a
M
Select
N
2
M
List
N
a
M
Menu
N
3
MbN
:
“
Erase all
”
a
M
Select
N
4
MbN
:
“
Yes
”
a
M
Select
N
5
MbN
:
“
Yes
”
a
M
Select
N
a
M
OFF
N
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R
The additional handset model
recommended for use with this unit is noted
on page 3. If another handset model is
used, certain operations may not be
available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
near the base unit), re-register the handset.
1
Handset:
M
Menu
N
(right soft key)
#130
2
Base unit:
Press and hold
M
LOCATOR
N
for about 5
seconds.
R
If all registered handsets start ringing,
press
M
LOCATOR
N
again to stop, then
repeat this step.
3
Handset:
Press
M
OK
N
, then wait until a long beep
sounds.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
M
Menu
N
(right soft key)
#131
R
All handsets registered to the base unit
are displayed.
2
MbN
: Select the handset you want to
cancel.
a
M
Select
N
3
MbN
:
“
Yes
”
a
M
Select
N
a
M
OFF
N
32
Programming
PRW130C(en)_0311_ver110.pdf 32
2014/03/11 13:06:43