Setting up SMS
SMS allows you to send and receive text
messages.
Important:
R
To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
Note:
R
A total of 22 messages (at 160 characters/
message) can be saved. Total number may
be more than 22 if length of messages is
less than 160 characters/message.
R
If the unit is connected to a PBX system,
you may not be able to use SMS features.
Turning SMS on/off
The default setting is
“
Off
”
.
1
M
Menu
N
(right soft key)
#357
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Storing SMS message centre
numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages. Contact your service provider/
telephone company for more information.
1
To store “
Message Centre1
”:
M
Menu
N
(right soft key)
#351
To store “
Message Centre2
”:
M
Menu
N
(right soft key)
#352
2
Edit the number as necessary.
a
M
OK
N
a
M
N
Note:
R
For PBX users:
– You need to add the PBX line access
number and a dialling pause to the
beginning of the Message Centre 1
number.
– If you only use the Message Centre 1
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Sending a message
Writing and sending a new
message
1
M
Menu
N
(right soft key)
a
a
M
OK
N
2
MbN
:
“
Create
”
a
M
OK
N
3
Enter a message.
a
M
OK
N
R
You can change the character entry
mode by pressing
M
R/ECO
N
(page 42).
4
Enter the destination phone number (20
digits max.).
a
M
OK
N
2 times
R
You can also set the phone number:
– from the redial list by pressing
MTN
.
– from the caller list by pressing
M N
.
– from the phonebook by pressing
MWN
.
5
To save the message, select
“
Yes
”
.
a
M
OK
N
6
To send the message, press
M
OK
N
.
Note:
R
This unit supports SMS messages of up to
612 characters, however, the maximum
number of characters you can send or
receive may be limited by your SMS service
provider/telephone company. Contact your
SMS service provider/telephone company
for details.
R
If your message contains over 160
characters, the message is a long message
and
“
II
Long Text
II
”
is displayed. Your
service provider/telephone company may
treat long messages differently from other
messages. Contact your service provider/
telephone company for details.
R
If your phone is connected to a PBX, store
the PBX line access number (page 37).
36
SMS (Short Message Service)
PRW110BX_UE_(en-en)_1120_ver043.pdf 36
11/20/2013 1:50:57 PM
