Adding a wireless access point
If you expand your wireless network by adding
a wireless access point that uses a different
SSID than your wireless router, use this
procedure to add the wireless access point to
the app’s settings. This allows your
smartphone to connect to the base unit when
your smartphone is connected to the new
access point.
Note:
R
The app can store 10 wireless access
points.
R
This procedure is not necessary if the
wireless access point uses the same SSID
as your wireless router.
1
Make sure your smartphone is connected
to the new access point.
2
Start the app and open the
[More]
screen.
3
Tap
[Settings]
.
4
Under
[Registration]
, tap
[Wireless AP]
®
[Add to list]
.
5
Select the base unit that you want to
associate with the new access point, and
then tap
[Select]
.
Deleting a wireless access point
Use this procedure only if you need to delete
unnecessary wireless access points.
Note:
R
You cannot delete a wireless access point if
your smartphone is currently connected it.
1
Start the app and open the
[More]
screen.
2
Tap
[Settings]
.
3
Under
[Registration]
, tap
[Wireless AP]
.
4
Select the wireless access point that you
want to delete and then tap
[Delete]
.
Deregistering your
smartphone
Use this procedure to delete your
smartphone’s registration from the desired
base unit.
1
Start the app and open the
[More]
screen.
2
Tap
[Settings]
.
3
Under
[Registration]
, tap
[Deregistration]
.
4
Tap the base unit that you want to
deregister from, and then tap
[OK]
®
[OK]
.
R
If your smartphone is not registered to
any other base units, you will be
prompted to register the smartphone
once again. See “Registering your
smartphone to the base unit” on
page 5 to register.
18
Registration Features
