To use this feature, set the date and time first (page 17).
*3 When the mobile line only mode is turned on, these menus are not displayed (page 22).
*4 The preset melodies in this product (
“
Ringtone 3
”
-
“
Ringtone 40
”
) are used with
permission of © 2012 Copyrights Vision Inc.
*5 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select
“
On
”
, the tone sounds 2 times.
*6 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*7 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
manual for more information on the key finder.
*8 This menu icon is displayed when the key finder is not registered.
*9 After the Bluetooth device is paired, the device name is displayed.
*10 For mobile 1
*11 For mobile 2
*12 The preset melodies in this product (
“
Ringtone 1
”
and
“
Ringtone 2
”
) are used with
permission of © 2013 Copyrights Vision Inc.
*13 For models with supplied key finders, the display shows
“
1:Finder1
”
.
*14 If you register 2 or more key finders.
*15 This menu is not displayed when repeater mode is set to
“
On
”
.
*16 You can select to display either a single item or multiple items on one screen at a time for
the handset menu list, phonebook list, caller list, and redial list. When in multiple items
display mode, you can switch the screen to confirm the detailed information by:
– pressing
M
N
, or
– pressing
M
N
a
MbN
:
“
Detail
”
a
M
OK
N
*17 You can set the handset display backlight while on charge.
–
“
On
”
: Backlight is on (dimmed).
–
“
Off
”
: Backlight turns off after 10 seconds of charging.
*18 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*19 If you select
“
United Kingdom
”
or
“
Deutschland
”
as the unit’s region setting
(page 47), the dialling mode setting is not shown on the display because it is not required
for these countries.
*20 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*21 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 47):
“
Deutschland
”
=
“
200 msec.
”
“
España
”
=
“
100 msec.
”
“
Italia
”
=
“
100 msec.
”
*22 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*23 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
41
Programming
PRL250EX1(en)1006_ver011.pdf 41
2014/10/06 15:04:35