Panasonic KX-PRD250EX1, Руководство по эксплуатации, Страница: 11 / 68

Setting up
Preparation of AC plug
n Installing the AC plug
Install the plug to AC adaptor according to
your area’s plug type.
Example of 3 pin AC plug for UK type:
A
B
Note:
R You can install the plug to the desired
position according to your power outlet type.
1 2
3 4
n Uninstalling the AC plug
Example of 3 pin AC plug for UK type:
B
C
A
Connections
Important:
R To use link to mobile feature only, a
telephone line cord is not required.
R If you want to use a landline feature but the
supplied telephone line cord is not available
for your country, please contact your
nearest Panasonic service centre for sales
information. In this case, set
“
Mobile
Line Only Mode
” to “
Off
” (page 22).
n Base unit
Run the telephone line cord (
1
) and AC
adaptor (
2
) through the slot of the stand.
Connect the telephone line cord (
1
) and
AC adaptor (
2
) to the jacks at the
bottom of the unit until you hear a click.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
telephone line jack until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV242WX.
3
5 4
2
1
1
1
2
2
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 11
Getting Started
PRL250EX1(en)1006_ver011.pdf 11 2014/10/06 15:04:33