Using the Control Panel
Selecting a Character Font
This printer contains resident fonts which are
accessible through the Control Panel. You can select
any one of the character fonts by pressing the FONT
switch on the Control Panel.
n
Press
FONT
.
The combination of FONT indicators (
A
) indicates the
current character font selected, as shown on the Control
Panel.
A
PROGRAM
Courier
Roman
Sans Serif
Prestige
Script
= light is lit.
= light is out.
= light is blinking.
Note
•
You must be in PROGRAM (both FONT
indicators are off) to allow your software to
control your font selection.
Selecting a Character Pitch
This printer contains resident pitches which are
accessible through the Control Panel. You can select
any one of the character pitches by pressing the PITCH
switch on the Control Panel.
n
Press
PITCH
.
The combination of PITCH indicators (
A
) indicates the
current character pitch selected, as shown on the
Control Panel.
A
PROGRAM
10 CPI
12 CPI
15 CPI
17 CPI
= light is lit.
= light is out.
= light is blinking.
Note
•
You must be in PROGRAM (both PITCH
indicators are off) to allow your software to
control your pitch selection.
28
Operating Instructions
Using the Control Panel
Using the Control Panel
