11.
Insert the paper support into the slot of the
extension plate (
A
) until it stops.
A
12.
If the ON LINE indicator is not lit, press
ON LINE
to get ready to print.
Single Sheets and Envelopes
(Friction Mode)
1.
A
Turn the power on.
The PAPER OUT indicator will flash indicating that
no paper is installed in the printer.
B
Adjust the head gap lever for the thickness
of paper you are using.
Position
Used for
1 or 2
Thinner sheets
3, 4, 5 and 6
Thick sheets or envelopes
A
B
HEAD GAP
2.
Set the paper feed selector (
A
) to the " "
position.
A
22
Operating Instructions
Setup