5.
Raise the tractor covers (
A
).
A
6.
Place the paper with the printed side face down
and align the paper sprocket holes (
B
) with the
tractor pins (
C
), then close the tractor cover
(
A
).
A
B
C
7.
A
Adjust the tractors (
A
) to remove any slack.
B
Lock the tractor clamping levers (
B
).
B
B
A
A
B
B
A
A
A
B
Note
•
Make sure the paper is straight.
8.
Press
LOAD/PARK
.
This will load the paper to the first print line.
9.
Raise the top cover (
A
).
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
A
10.
Raise the paper support (
A
).
A
Operating Instructions
21
Setup
