Panasonic KX-NT400 Скачать руководство пользователя

Страница: 201 / 214

Error Messages

During operation, error messages might appear on the KX-NT400. The following table lists these messages
and possible causes and solutions.

Message

Possible Causes & Solutions

Reference

The password you
inputted was incorrect.
Please try again.

•

The password you entered is not correct.

→

Confirm the password and try again.

—

SD card doesn’t exist.

•

SD card was removed during access.

→

Do not remove the SD memory card while it is being
accessed.

—

Cannot access SD card.

SD Card or folder not
found.

The firmware upgrade
failed because the file
does not exist.

SD card format is invalid.

•

The SD memory card is not formatted in FAT format.

→

Format the SD memory card with the KX-NT400.

•

You attempted to format an SDHC memory card.

→

SDHC memory cards are not compatible with the
KX-NT400. Use a compatible SD memory card.

Page 191
Page 190

Unsupported SD Card
format.

Can’t access the file.

•

The SD memory card cannot be used for backing up because
it is full.

→

Delete unneeded data.

—

Cannot access SD Card or
SD Card is read-only.

•

The switch on the side of the SD memory card is set to the
LOCK position.

→

Remove the card, slide the switch to the WRITE position,
and then insert the card again.

Page 190

Check a Network cable.

•

The Ethernet cable is not connected.

→

Check all connections.

Page 158

DHCP server is not found.

•

The KX-NT400 cannot receive IP settings from the DHCP
server.

→

Consult your administrator.

—

Data Acquisition Failed.

•

Data could not be correctly acquired from the PBX.

→

Follow the instructions to restart the KX-NT400.

—

Firmware folder does not
exist in SD card.

•

The folder that the KX-NT400 uses does not exist on the SD
memory card.

→

On the SD card, create the following folder:

\private\meigroup\pcc\pbxpt\nt400

—

The firmware file has not
been downloaded. Please
check the settings and
download the firmware
first.

•

The file necessary for upgrading the firmware has not been
downloaded.

→

On the

Firmware Version Update

screen, press

Start

next to

Download

to begin the downloading the firmware

upgrade file.

Page 171

Operating Instructions

201

Appendix

Содержание KX-NT400























































































































































































































Результаты поиска

Содержание KX-NT400

Отзывы:

Похожие инструкции для KX-NT400

Бренды по названию

Популярные бренды

Panasonic KX-NT400, Руководство по эксплуатации

Результаты поиска

Содержание KX-NT400

Отзывы:

Похожие инструкции для KX-NT400

Бренды по названию

Популярные бренды