secondary ports of the KX-NT400 on different
VLANs by assigning separate VLAN IDs to each
port.
QoS Setting screen (2/2)
Select whether to enable communication via Diffserv. If
you enable Diffserv communication, set
DS Field
for the
Primary Port
.
Primary Port
Select whether to use Diffserv to enhance the
network traffic controlling.
•
Default:
Disable
DS Field
Enter the priority level of the KX-NT400’s packets
for the priority control.
•
Default: 5.0
Note
•
To use Diffserv, confirm that the routers
installed to your network support this feature.
For details, consult your administrator.
•
You can reset the settings to their default values
by pressing
Reset to Default
.
Maintenance
You can view MAC addresses of the KX-NT400 and
verify connections for the network devices on this
screen.
Network Maintenance screen
You can view the MAC addresses of the KX-NT400 and
verify the network connection.
VoIP
Shows the MAC address used for VoIP data.
Application
Shows the MAC address used for data other than
VoIP data.
Verifying a Connection (Send PING)
1.
On the
Setup
screen, press
Maintenance
.
2.
Enter an IP address in
IP Address
, and then press
Send
.
A window appears showing the result of the
verification.
3.
On the result window, press
Close
.
170
Operating Instructions
Installation and Setup
