manualshive.com logo in svg

Panasonic KX-NT400, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-NT400 Скачать руководство пользователя страница 163

Bluetooth Headset Operation

The KX-NT307 Bluetooth module allows third party
Bluetooth headsets to be used with the KX-NT400. It is
not guaranteed that all features of the Bluetooth
headset will be available when used with the
KX-NT307 Bluetooth module.

Note

•

One Bluetooth headset can be registered with
the module.

•

The KX-NT307 Bluetooth module supports
Bluetooth devices that use the headset profile
(HSP) and hands-free profile (HFP).

Registering the Bluetooth headset

Set the headset pairing mode by following the
instructions provided with the Bluetooth headset.

1.

Press the 

Options

 tab > 

Administrator Options

 >

Programming

.

2.

On the 

Programming

 screen, press 

PROG

.

3.

Press 

 

.

4.

Press 

 (

ENTER

).

5.

Enter the Pass Key for your Bluetooth headset and
then press 

 (

ENTER

).

For more information regarding the Pass Key, see
the documentation for your headset, or consult the
Bluetooth headset’s manufacturer.

•

When registration has been completed, you will
hear a confirmation tone.

•

If you hear a warning tone, confirm the
Bluetooth headset’s Pass Key, press 
(

CANCEL

), and repeat this step.

6.

Press 

EXIT

 to exit programming mode.

Note

•

Do not turn the headset power off until the
headset completes establishing a link to the
KX-NT400 (the Message/Ringer Lamp will flash

green for 3 seconds), or the headset may fail to
link.

•

If you have already registered a Bluetooth
headset that you do not want to use anymore,
register the correct headset.

•

For more information about confirmation and
warning tones, refer to the User Manual of the
PBX.

Assigning a Headset Mode button

A flexible key can be assigned as a Headset Mode
button.
The Headset Mode button can be used to turn Headset
Mode on and off. A flexible button assigned as the
Headset Mode button displays Headset Mode status as
follows:

•

Red

: Headset Mode on

•

Off

: Headset Mode off

1.

Press the 

Options

 tab > 

Administrator Options

 >

Programming

.

2.

On the 

Programming

 screen, press 

PROG

.

3.

Press the flexible button you want to assign.

4.

Press 

 

, and then press 

 (

ENTER

).

Confirming the ID of the Bluetooth headset and
de-registering the Bluetooth headset
1.

Press the 

Options

 tab > 

Administrator Options

 >

Programming

.

Operating Instructions

163

Installation and Setup

Содержание KX-NT400























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды