Wall Mounting
15
Wall Mounting
1.
Remove the stand if it is attached. For information on removing
the stand, refer to page 13.
2.
Attach the wall mounting
adaptor as shown.
•
Make sure the cables are not
pinched by the wall
mounting adaptor. When
running the cables from the
top of the unit, look through
the opening in the wall
mounting adaptor to confirm
that the cables are not being
pinched.
•
Slide the wall mounting
adaptor in the direction
indicated until it locks into
place.
3.
Drive the 2 screws into the
wall either 83 mm or 100
mm apart, and mount the
unit on the wall.
•
You can find a wall mounting
template on page 183.
•
Make sure that the wall that
the unit will be attached to is
strong enough to support the
unit (approx. 1.5 kg).
•
Make sure the cables are
securely fastened to the wall.
•
When this unit is no longer in
use, make sure to detach it
from the wall.
83 mm
100 mm
Drive the screw
to this point.
Washer
NT321NE_GQ.book Page 15 Thursday, September 11, 2008 6:57 PM
