Wall Mounting
100 mm
Screw
3
Mount the base unit securely on the wall.
83 mm
(3-1/4 in) (3-15/16 in)
To AC Outlet
1
Install 2 screws spaced 83 mm (3-1/4 in)
or 100 mm (3-15/16 in) apart, to the wall.
2
Insert the upper and lower tabs
of the wall mounting plate (included)
into the designated openings in the
base unit, then slide it in the direction
of the arrow until it clicks.
If you are using the Ethernet cable with boots, you can mount the
unit on a wall using the wall mounting plate (included) by following
the steps below.
Ethernet cable (Straight CAT 5 or higher cable) [not included]
To a Switching Hub (LAN)
83 mm (3-1/4 in)
100 mm (3-15/16 in)
for base unit
—
12
—
