Panasonic KX-NS700 страница 570 Скачать руководство пользователя

Страница: 570 / 580

6.4 Supported Management Information Base (MIB)
Table

System Group (1.3.6.1.2.1.1)

Object ID

Item

Description

sysDescr

Information of Hardware type and Software version of the Device.

sysObjectID

Object identifier of this product.

sysUpTime

Elapsed time since the system was restarted.

sysContact

Device Administrator.

sysName

Name of Device.

sysLocation

Installation Location of Device.

sysService

Support Layer.

Interface Group (1.3.6.1.2.1.2)

Object ID

Item

Description

ifNumber

The number of Network Devices.

IfTable (NA)

Management Table by each Network Device.

2.1

IfEntry (NA)

Components of ifTable.

2.1.1

ifIndex

Each interface identifier.

2.1.2

ifDescr

Explanation of Interface.

2.1.3

ifType

Type of Interface.

2.1.4

ifMtu

Maximum Datagram Length which can be sent/received.

2.1.5

ifSpeed

Maximum Transfer Speed.

2.1.6

ifPhysAddress

Physical Address (MAC Address).

2.1.7

ifAdminStatus

The desired state of the interface.

2.1.8

ifOperStatus

The current operational state of the interface.

2.1.9

ifLastChange

The value of sysUpTime at the time the interface entered its current
operational state (up or down).

2.1.10

ifInOctets

The number of Octets received.

2.1.11

ifInUcastPkts

The number of Unicast Packets delivered to a higher-layer
protocol.

2.1.12

ifInNUcastPkts

The number of Non Unicast Packets delivered to a higher-layer
protocol.

2.1.14

ifInErrors

The number of inbound Packets that contained errors.

2.1.15

ifInUnKnownProtos

The number of Packet received which are discarded because of an
unknown/unsupported protocol.

570

Feature Manual

6.4 Supported Management Information Base (MIB) Table

Содержание KX-NS700





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание KX-NS700

Отзывы:

Похожие инструкции для KX-NS700

Бренды по названию

Популярные бренды

Panasonic KX-NS700, Руководство по функциям

Результаты поиска

Содержание KX-NS700

Отзывы:

Похожие инструкции для KX-NS700

Бренды по названию

Популярные бренды