Panasonic KX-NS700, Руководство по функциям

Страница: 232 / 580

2.18 External Device Features
2.18.1 Doorphone Call
Description
It is possible to connect doorphones directly to the PBX. When a visitor presses the call button on a doorphone,
the doorphone calls a preprogrammed destination (extension or outside party). In addition, extension users
can dial the preset number of a doorphone to call that doorphone.
Conditions
•
Hardware Requirement:
An optional doorphone and a DPH2 card
•
Each doorphone port can only be assigned to one tenant. The Time Table (day/lunch/break/night) of the
tenant applies. (
®
5.1.4 Time Service)
•
Call Destination
The incoming doorphone call destination(s) can be assigned for each time mode (day/lunch/break/night)
for each doorphone port. Destinations can be selected. (
®
2.1.2.1 Internal Call Features—SUMMARY)
•
COS programming determines the doorphone ports that are able to make an outgoing trunk call.
•
Internal Call Block determines which extensions can call a doorphone. (
®
2.1.2.2 Internal Call Block)
•
Ring Duration
If an incoming call is not answered within a preprogrammed time period, ringing stops and the call is
cancelled.
•
Call Duration
The call duration can be restricted by a system timer. If the timer expires, the call will be disconnected.
•
Door Open
While engaged on a doorphone call, the extension user can unlock the door to let the visitor in.
(
®
2.18.2 Door Open)
•
A doorphone number can be referenced for each doorphone port.
•
For KX-UT670 users
The video feed from a network camera can be displayed on the telephone’s display when a call from a
doorphone is received if the following settings are configured on the telephone:
–
The doorphone’s 2-digit number is registered to a contact, and Doorphone is selected as the
number’s label.
–
The network camera is registered to the contact.
For details about the settings, refer to the telephone’s documentation.
Installation Manual References
4.7.1 DPH2 Card (KX-NS5162)
4.9 Connecting to a Doorphone, Door Opener, and/or External Sensor
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—DISA / Door / Reminder / U. Conf
→ Doorphone—Call Ring Duration (x10s)
→ Doorphone—Call Duration (x10s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features— DOORPHONE Call
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS— TRS Level—Day,
Lunch, Break, Night
232 Feature Manual
2.18.1 Doorphone Call