Panasonic KX-NS500, Руководство по программированию ПК

Страница: 411 / 1064

9.32 PBX Configuration—[1-1]
Configuration—Slot—Expansion Unit1/Expansion
Unit2/Expansion Unit3
Settings for Expansion Units connected to the KX-NS500 over a stacking connection can be programmed.
Click
Expansion Unit1 , Expansion Unit2 or Expansion Unit3 on the Slot screen to view the physical card
shelf of the Expansion Unit.
Note
•
Expansion Units must first be pre-installed before they can be programmed. For details, see To
pre-install PBXs connected to the EXP-M card in 9.1 PBX Configuration—[1-1]
Configuration—Slot .
•
For information about hardware configuration restrictions and conditions for Expansion Units, refer to
4.6 Expansion Card in the KX-NS500 Installation Manual.
To install a new physical card in a Expansion Unit
1.
Click on the name of the card to install in the list on the right. An image of the card will be displayed, and
information about the card will be shown.
2.
Click and drag the image of the card to the slot, and release it. The card will move into the slot space.
3.
Click OK to confirm.
To change the status (INS/OUS) of a Expansion Unit
1.
Move the mouse pointer over the Shelf Status button. A menu will be shown under the mouse pointer.
2.
Select the desired status:
•
Click INS to set the shelf to in-service status.
•
Click OUS to set the shelf to out-of-service status.
To remove a Expansion Unit from the EXP-M card
1.
Move the mouse pointer over the Shelf Status button. A menu will be shown under the mouse pointer.
2.
Click Delete . The Expansion Unit will be deleted from the system and the corresponding shelf button will
become greyed out.
Note
The Expansion Unit must be set to OUS before it can be deleted.
Programming cards installed in a Expansion Unit
You can access the card properties and port properties of the physical cards installed in a Expansion Unit
using the KX-NS500 Web Maintenance Console Interface. The settings, setting values, and other information
is similar to programming using the Unified PC Maintenance Console. Refer to the PC Programming Manual
of the Expansion Unit PBX for programming information.
Programming Card Properties for cards installed in Expansion Units
For your reference, the following information is included on each Card Property screen for cards installed in
Expansion Units:
Shelf : The shelf number of the EXP-M card Expansion Unit connection:
•
2: Expansion Unit1
PC Programming Manual 411
9.32 PBX Configuration—[1-1] Configuration—Slot—Expansion Unit1/Expansion Unit2/Expansion Unit3