Panasonic KX-NS500 Скачать руководство пользователя страница 447

Страница: 447 / 580

4.3.5 QSIG Enhanced Features

Description

When PBXs are networked using ISDN or V-IPGW cards, the following enhanced features are available.

When Calling an Extension in Another PBX and the Called Extension is Ringing

Feature

Description and Reference

Leave Message Waiting

2.20.1 Message Waiting

Absent Message Display

2.20.2 Absent Message

Ringing extension name display
before answer

The ringing extension’s name is displayed to the caller before the
call is answered.

When the Called Extension of Another PBX is Busy

Feature

Description and Reference

Call Waiting

2.1.3.3 Call Waiting

Note

When this feature is used over a network, a call waiting tone
will be sent, even if OHCA or Whisper OHCA is enabled.

Executive Busy Override

2.10.2 Executive Busy Override

Call Monitor

2.10.3 Call Monitor

Leave Message Waiting

2.20.1 Message Waiting

•

When a called extension on another PBX is busy, Automatic Callback Busy can be used as a Standard
QSIG feature (

4.3.4.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG).

•

The caller will be informed an extension is busy with a busy tone and a display indication.

•

Soft button operation is available for Call Waiting, Automatic Callback Busy and Executive Busy Override.

When the Called Extension of Another PBX has Do Not Disturb (DND) Set

Feature

Description and Reference

DND Override

2.3.3 Do Not Disturb (DND)

•

The caller will be informed an extension is set to DND by a DND tone and a display indication.

•

Soft button operation is available for DND Override.

When Receiving a Call from an Extension of Another PBX

Feature

Description and Reference

Ring tone

Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to ring tone settings.

2.1.3.2 Ring Tone Pattern Selection

Call Waiting

Incoming calls from extensions in other PBXs are handled as
intercom calls in regards to Call Waiting settings.

2.1.3.3 Call Waiting

Feature Guide

447

4.3.5 QSIG Enhanced Features

Содержание KX-NS500





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание KX-NS500

Отзывы:

Похожие инструкции для KX-NS500

Бренды по названию

Популярные бренды

Panasonic KX-NS500, Руководство по функциям

Результаты поиска

Содержание KX-NS500

Отзывы:

Похожие инструкции для KX-NS500

Бренды по названию

Популярные бренды