background image

2.5.4.8  Host PBX Access Code (Access Code to the Telephone
Company from a Host PBX)

Description

This PBX can be installed behind an existing PBX (host PBX) by connecting the extension ports of the host
PBX to the trunk ports of this PBX (behind PBX). A Host PBX Access code is required for the behind PBX to
access the telephone company (e.g., to make outside calls) through the host PBX. The Trunk access number
of the host PBX should be stored as a Host PBX Access code on a trunk group of the behind PBX.
A preprogrammed Pause time will be automatically inserted between the user dialled Host PBX Access code
and the subsequent digits (2.5.4.7  Pause Insertion).

[Example]

Dials "9-0-01-23-4567".

Idle Line

Access No.

Telephone No.

Host PBX

Access Code

Outside Party

(01-23-4567)

Extn. 101 

Extn. 102

TRG1

Telephone Company

Host PBX

PBX

Dials "9-101".

Idle Line

Access No.: 9

Idle Line

Access No.

Extn. No.

of the Host PBX

Dials "0-01-23-4567".

Host PBX

Access Code

Telephone

No.

Host PBX

Access Code: 0

Note

"0" should be assigned as a Host PBX Access code for trunk group (TRG) 1 of the behind PBX.

Conditions

TRS/Barring

112

Feature Guide

2.5.4 Trunk Call Features

Содержание KX-NS500





































































































































































































































































































































































































































































































































































































Отзывы: