Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 91 / 884

6.9 Tool—UM Data Restore
Follow the procedure below to restore data backed up using the UM Data Backup tool.
This screen can be accessed only in On-line mode.
For more information about the UM Data Backup tool, see
6.8 Tool—UM Data Backup . You can restore data
from a USB memory device connected to the PBX or from a file on your local PC.
1.
Select the check boxes of the items to restore.
2.
In System Restore , select Local PC or USB Flash Drive (Main Unit) .
•
Local PC
Click Browse and select a backup file from your local PC. The file must have been saved using the
UM Data Backup tool.
•
USB Flash Drive (Main Unit)
When USB Flash Drive (Main Unit) is selected, the folder selection menu becomes active. Specify
the folder on the USB memory device where the backup data is saved.
•
NAS
When NAS is selected, the folder selection menu becomes active. Specify the folder on the NAS where
the backup data is saved.
Note
Before selecting USB Flash Drive (Main Unit) , make sure that the USB memory device with the
backup data is connected to the Main unit.
To restore a single file:
Files that match the selected types of items to restore will be highlighted.
Click a file in the list to display its name in the text box. You can also click a folder name to display that
folder’s contents, and then click a file to select it.
To restore multiple files at once:
Folders whose contents match the selected types of items to restore will be highlighted.
Click a folder in the list to display its name in the text box. You can also click a folder name to display that
folder’s contents, and then click a folder to select it.
Note
When restoring data from a local PC, up to 40 files can be selected at one time. When there are a large
number of files to restore, they should be restored from the folder on the USB memory device.
3.
Click OK to restore the selected file or folder of files.
•
Local PC
The results of the data restore will be downloaded from the PBX as a text file called
"UM_data_restore_result.txt". Save the file to your local PC to view its contents.
•
USB Flash Drive (Main Unit)
The results of the data restore will be saved in a text file called "UM_data_restore_result.txt" on the
USB memory device. To view this file, you must connect the USB memory device to a PC and then
open the text file.
•
NAS
The results of the data restore will be saved in a text file called "UM_data_restore_result.txt" on the
NAS. To view this file, you must connect to the NAS and copy to a PC and then open the text file.
Note
•
When restoring multiple items, only files that match the items for which check boxes have been selected
will be restored. Also, even if data exists in the specified folder of the USB memory device, the data
will not be restored unless the check box of the matching item has been selected.
•
Data in sub-folders of a selected folder will not be restored.
•
If more than one file matches a selected item, the newest file will be restored.
PC Programming Manual 91
6.9 Tool—UM Data Restore