Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 437 / 884

Feature Guide References
2.12.1 Call Transfer
DSS Key—Caller Information Display before Call Pick-up
Specifies whether incoming caller information is displayed after pressing the DSS button when a call is ringing
at the designated extension, instead of answering the call.
Value Range
Enable: Pressing the DSS button displays the caller’s information.
Disable: Pressing the DSS button answers the call.
Feature Guide References
2.4.3 Call Pickup
Private Network—Public Call through Private Network—Minimum Public Caller
ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered as a call
from a public network.
Value Range
0–15
Feature Guide References
2.19.1 Caller ID
Private Network—TIE Call by Extension Numbering
Enables extensions at two PBXs connected in a network to have the same leading number. For example,
extension 101 is registered at PBX 1, and extension 102 is registered at PBX 2. Only the Extension Number
Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Value Range
Disable, Enable
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private Network—TIE Table— Leading Number
Feature Guide References
4.2.1 TIE Line Service
PC Programming Manual 437
10.9 PBX Configuration—[2-9] System—System Options