Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 427 / 884

PT Operation—PT Ring Off Setting
Specifies whether incoming call ringing can be turned off at individual extensions. If disabled, users cannot
prevent incoming calls from ringing.
Value Range
Disable, Enable
Feature Guide References
2.1.3.2 Ring Tone Pattern Selection
PT Operation—Automatic Answer for Call from CO after
Specifies the number of times a PT in Hands-free Answerback mode will ring before a conversation is
established automatically when it receives a call from a trunk.
Value Range
No Ring, 1 Ring, 2 Rings, 3 Rings
Feature Guide References
2.4.4 Hands-free Answerback
PT Operation—Automatic Hold by ICM / CO / ICD Group Key
Selects whether calls are disconnected or held when an INTERCOM, PDN, CO, or ICD Group button is pressed
while having a conversation.
Value Range
Disable (Disconnect), Enable
PC Programming Manual References
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
Feature Guide References
2.13.1 Call Hold
PT Operation—Hold key mode
Selects which extensions can retrieve a held call or a call that is transferred by Call Transfer without
Announcement feature.
Value Range
Hold: Any extension can retrieve a held call.
Exclusive Hold: Only the holding extension can retrieve a held call.
Feature Guide References
2.13.1 Call Hold
PC Programming Manual 427
10.9 PBX Configuration—[2-9] System—System Options