Panasonic KX-NS300CN, Руководство по программированию ПК

Страница: 27 / 884

VoIP Test Tool
Click the VoIP Test Tool button to launch the VoIP Test Tool. This tool is identical to the VoIP Test Tool
included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
IP Terminal Utility
Click the IP Terminal button to launch the IP Terminal setup utility. This utility is identical to the IP Terminal
utility included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
IP Trace File Converter
Click the IP Trace File Converter button to launch the IP Trace File Converter utility. This utility will convert
locally-saved IP trace file data collected by the system utilities listed below into a format that can be analysed
by general packet analysis software tools.
–
7.4.2 Utility—Monitor/Trace—V-IPGW Protocol Trace
–
7.4.3 Utility—Monitor/Trace—V-SIPGW Protocol Trace
Others
Others is a tool used to edit files saved by using the Export tool. Copy files from the Others folder to edit them.
After saving edited files, import them to the PBX.
The following types of data types can be edited.
•
Feature – Speed Dial and Caller ID
•
Incoming Call – DDI/DID Table
•
Wired Extension
•
PS Extension
For details, see "6.5 Tool—Import" and "6.6 Tool—Export".
Programming in Off-line Mode
Once you have logged in to Off-line Web Maintenance Console, programming is very similar to On-line mode.
The title bar will be coloured differently from when in On-line mode:
When programming in On-line mode:
When programming in Off-line mode:
Some items are not programmable when in Off-line mode, and those items will be greyed out. Some tools and
utilities are also not available in Off-line mode. For details, refer to
2.1.2 Access Levels .
Notice
•
In Off-line mode, changes made in 6.7 Tool—Screen Customise will not be reflected in On-line mode.
This is because these settings are not stored in the system data file (DFSYS).
•
When you load the system data file to the PBX, you must install any required activation keys in On-line
mode. Activation keys are required for mailboxes. Settings such as mailbox passwords will be cleared
if the number of activation keys for mailboxes is insufficient.
Uploading Programmed Settings to the PBX
When programming in Off-line mode, clicking the icon will open a save dialogue box. Specify a location and
file name for the system data file. This file can then be uploaded to the PBX in On-line mode using the "File
Transfer PC to PBX" utility. For details, refer to
7.2.1 Utility—File—File Transfer PC to PBX .
PC Programming Manual 27
1.2.2 PC Programming Using Off-line Mode