Panasonic KX-NS300, Руководство по программированию ПК

Страница: 626 / 752

Name Description Value Range Links
Period 1–5,
Outside Period 1–5 :
Specifies the name of time
period for reference, start
and end time, and an
operation.
Note
When the start time is
specified and the end
time is "None", the
period will end at
"00:00".
Outside :
Allows you to specify an
operation that is enabled for
all other times not included
in the set time periods.
Period 1–5 :
Name: Max. 16 characters
From/To: Select the check box, click the
input field, and then specify a time (hour
and minute). You can specify a
beginning time (From), ending time
(To), or both for each period.
Assigned Operation: Trf to Mbx, Trf to
Ext, Operator, Trf to Out, Exit, Prev
Menu, CS, VM Serv, Call Trf Serv,
Subscriber Serv, Dial by Name, Repeat
Menu, Main Menu, Trf to Fax Extn, List
All Names, None (see
23.3.1 UM
Configuration—[4-3] Service Settings
—Custom Service—Menu & Transfer
—Key – Assigned Operation: 0–9, *,
#
)
Outside :
Name: Max. 16 characters
Assigned Operation: Trf to Mbx, Trf to
Ext, Operator, Trf to Out, Exit, Prev
Menu, CS, VM Serv, Call Trf Serv,
Subscriber Serv, Dial by Name, Repeat
Menu, Main Menu, Trf to Fax Extn, List
All Names, None (see
23.3.1 UM
Configuration—[4-3] Service Settings
—Custom Service—Menu & Transfer
—Key – Assigned Operation: 0–9, *,
#
)
Feature
Manual
References
3.2.1.15 Custom
Service
23.3.4 UM Configuration—[4-3] Service Settings—Custom
Service—Day Control
The below parameters are set for the Menu Transfer Custom Service in the Custom Service Builder.
This service allows you to assign a different operation for each day of the week, and for all holidays. The
caller makes no selection and no menu is announced.
Name Description Value Range Links
Description The information typed in this field is for
reference only. Max. 32 characters Feature
Manual
References
3.2.1.15
Custom Service
23.3.4 UM Configuration—[4-3] Service Settings—Custom Service—Day Control
626 PC Programming Manual