Panasonic KX-NS300, Руководство по программированию ПК

Страница: 225 / 752

9.13 PBX Configuration—[1-1] Configuration—Slot
—Card Property—V-IPEXT
The properties of the V-IPEXT card can be specified.
Name Description Value Range Links
Signalling
(MGCP) UDP
Port No. (IP-PT) Indicates the UDP port used to transmit
and receive MGCP (Media Gateway
Control Protocol) data on the IP-PT
side (reference only). 2427 Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Keep Alive Time-
Out Specifies the length of time that the
PBX will continue to consider an IP-PT
to be active even if it receives no
transmissions from that IP-PT. The
PBX constantly confirms the status of
IP-PTs. If no communications are
received from an IP-PT for the duration
specified here, the PBX considers the
IP-PT to be unreachable, and sets the
port status to
Fault .
During operation, set between 10 s and
60 s. Settings over 60 s, and
Disable ,
are used for debugging purposes, and
IP-PTs cannot be guaranteed to
function normally in these
circumstances. Do not use debugging
settings unless instructed to do so.
To change the value displayed here,
click
Common Settings and set the
desired value.
Disable, 10–120
s Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
First Resending
Time (PTAP) Specifies the length of time that the
PBX waits before starting to resend
PTAP (Panasonic Telephony
Administration Protocol) data.
To change the value displayed here,
click
Common Settings and set the
desired value.
500 × n (n=1–
16) ms
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Resending Time
Out (PTAP) Specifies the length of time after which
the PBX terminates resending PTAP
(Panasonic Telephony Administration
Protocol) data.
To change the value displayed here,
click
Common Settings and set the
desired value.
150–240 s Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
9.13 PBX Configuration—[1-1] Configuration—Slot—Card Property—V-IPEXT
PC Programming Manual 225