Panasonic KX-NS1000, Руководство по программированию, Страница: 476 / 1182

2.7.6 Verification Code Entry
2.24.1 Extension Personal Identification Number (PIN)
External Sensor—Ring Duration
Specifies the length of time that the PBX waits for the called party to answer before cancelling a sensor call.
Value Range
10
´
n (n=1–15) s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.18.3 External Sensor
Incoming Call Inter-digit Timer—DDI / DID
Specifies the length of time between digits when receiving a DDI/DID number from a public network. The call
will be redirected to a PBX operator when this timer expires.
Value Range
0–30 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual References
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Feature Guide References
2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Incoming Call Inter-digit Timer—TIE
Specifies the length of time between digits when receiving a dialled number from a TIE line. The call will be
redirected to a PBX operator when this timer expires.
Value Range
3–30 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
476 PC Programming Manual
10.3 PBX Configuration—[2-3] System—Timers & Counters